-
Milling-turning compund lathes
-
CNC lathe with inclined rail
-
Flat-bed CNC Lathe
-
Engine lathe
-
Vertical machinging center
1、spindle:The spindle is structured with high-power,large-torque,and high-precision sleeve,characterized by increased reduction ratio and good low-speed performance.
2、Turret:The servo turret is configured with the servo motor indexing,crankset positioning and hydraulic clamping mechanisms,or a traditional servo turret is used.
3、X/Z-axis:It is driven by a high-grade imported precision ball screw with the roller guide widened and span increased,thereby with standing heavy cutting.
4、Tailstock:Automatic programmable tailstock for easy operation and application.
Item | unit | G-380/1500 | G-380/1000 | G-380/800 | Remark | ||||
Working range | Maximum spinning diameter | mm | Φ580 | ||||||
Maximum turning diameter of disk parts | mm | Φ460 | |||||||
Maximum turning diameter of shafes parts | mm | Φ380 | |||||||
Maximum machining length | mm | 1600 | 1100 | 870 | |||||
Saddle inclination against the level | ° | 45° | |||||||
Spindle | Spindle motor | kw | 15/18.5（continuous/30minutes） | 11/15（continuous/30minutes） | |||||
Spindle end | A2-8 | A2-6 | |||||||
Diameter of spindle through-hole | mm | Φ93 | Φ62 | ||||||
Maximum rotational speed of spindle | r/min | 3000 | 4500 | ||||||
Spindle precision | mm | Radial clearance≤0.008, axial clearance≤0.005 | |||||||
Coordinate axis | Maximum travel along the horizontal direction(X-axis) | mm | 260 | ||||||
Maximum travel along the vertical direction(Z-axis) | mm | 1610 | 1110 | 880 | |||||
X-axis serve unit | 15Nm,3000r/min | ||||||||
Z-axis serve unit | 15Nm,3000r/min | ||||||||
Maximum feed rate along the X-axis | m/min | 24 | |||||||
Maximum feed rate along the Z-axis | m/min | 24 | |||||||
Positioning precision | mm | X±0.006,Z±0.011, | |||||||
Repeated Positioning precision | mm | X±0.003,Z±0.003, | |||||||
Tool post | Type of tool post | Servo power tool post | |||||||
Number of tools | 8-station or 12-station | ||||||||
Specification of outer diameter and end face tool holder | mm | 25X25 | |||||||
Diameter of inner hole tool seat | mm | Φ40 | |||||||
Clamping device | chuck | 8"three-jaw medium ho11ow oil pressure chuck | |||||||
Hydraulic cylinder | Medium solid rotary cylinder | ||||||||
Hydraulic tailstock | Maximum travel of tailstock | mm | 900 | ||||||
Taper of the center sleeve | MT5 | ||||||||
Hydraulic system | Oil tank capacity | L | 60 | ||||||
Hydraulic pump pressure | kg | 35 | |||||||
Chip removal | Auto chip conveyor | Chain plate type chip removal conveyor and chip collecting truck | |||||||
Others | Total capacity of lathe power supply | kw | 28 | 24 | |||||
Boundary dimension：length x width x height | mm | 4200x2000x2000 | 3400x2000x2000 | 3000x2000x2000 | |||||
Net weight of lathe | kg | 6200 | 5200 | 4700 | |||||
